jeans info
jeans info
our jeans are cut for movement, not stretch — 15oz heavyweight cotton denim with barely any give. that means fit matters more here than with your average pair of jeans. use the chart and the calculator below to land on the right size before you order.
size chart
measurements in inches. waist size is your tag size — garment measured flat, so multiply the top row by 2 for actual finished waist circumference.
| size | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 |
|---|---|---|---|---|---|---|---|---|
| waist (flat measure) | 14.25 | 15.25 | 16.25 | 17.25 | 18.25 | 19.25 | 20.25 | 21.25 |
| hip, 5″ down | 18.00 | 19.00 | 20.00 | 21.00 | 22.00 | 23.00 | 24.00 | 25.00 |
| hip, 9″ down | 19.50 | 20.50 | 21.50 | 22.50 | 23.50 | 24.50 | 25.50 | 26.50 |
| thigh, 1″ down from crotch | 11.50 | 12.00 | 12.50 | 13.00 | 13.50 | 14.00 | 14.50 | 15.00 |
| knee, 14″ down from crotch | 8.75 | 9.12 | 9.50 | 9.88 | 10.25 | 10.62 | 11.00 | 11.38 |
| bottom opening | 7.62 | 7.88 | 8.12 | 8.38 | 8.62 | 8.88 | 9.12 | 9.38 |
| bottom height | 0.38 | 0.38 | 0.38 | 0.38 | 0.38 | 0.38 | 0.38 | 0.38 |
| front rise, incl. waistband | 9.00 | 9.50 | 10.00 | 10.50 | 11.00 | 11.50 | 12.00 | 12.50 |
| back rise, incl. waistband | 13.24 | 13.74 | 14.24 | 14.74 | 15.24 | 15.74 | 16.24 | 16.74 |
| waistband height | 1.50 | 1.50 | 1.50 | 1.50 | 1.50 | 1.50 | 1.50 | 1.50 |
| placket length | 5.25 | 5.50 | 5.75 | 6.00 | 6.25 | 6.50 | 6.75 | 7.00 |
| placket width | 1.75 | 1.75 | 1.75 | 1.75 | 1.75 | 1.75 | 1.75 | 1.75 |
length runs separately from waist — available in:
flared cuts run baggier through the leg by design, and sit longer than a straight leg at the same length — a flared 30″ will break lower than a straight 30″.
not sure what size to grab?
enter your height, weight, and your usual jeans waist size, then pick a fit. we'll spit out a recommended size.
this is a starting point based on general sizing patterns, not an exact fit guarantee — message us if you're between sizes and we'll help you pick.
jeans & hemming
length can also vary slightly depending on the size you select. sometimes we hem your pair to the exact length ordered by hand, so small differences in finish, stitching, or hem placement piece to piece are part of the process — not a defect.
flared styles also sit longer through the leg than a straight cut at the same size — a flare will break lower than a straight leg at that same length.